Super Mini Vortex Tattoo Ink Mixer

Mix 1oz and 2oz tattoo ink bottles fast and evenly. This super mini vortex mixer creates centrifugal vortex motion to re-suspend pigment in seconds. Use it to prevent settling, improve consistency, and keep colour and black mixing uniform across sessions.

Key features

• Centrifugal vortex mixing (no linear rocking)
• Designed for 1oz and 2oz ink bottles
• Fast mixing in about 5 seconds (depends on viscosity and fill level)
• 3-speed control with digital power and gear display
• Rechargeable and wireless operation
• Type-C charging
• Stable anti-slip base for bench use
• Auto touch switch control (long press on, click to change gear)

Specs

• Speed: Gear 1 = 3520 RPM, Gear 2 = 4000 RPM, Gear 3 = 5200 RPM
• Battery: 1000mAh
• Working voltage: 3.7V
• Charging: Type-C
• Size: 70 × 70 × 82 mm
• Weight: 215 g

Studio safety and hygiene

• Do not mix inks at the workstation or near open trays.
• Mix at a separate prep area to reduce contamination risk.
• Always barrier the mixer before use with a machine bag or barrier film.
• If using barrier tape, fully cover touch points and contact surfaces.
• Remove and discard barriers after use. Disinfect the unit exterior.

How to use

• Place the mixer on a flat, stable surface in your prep area.
• Barrier the unit with a machine bag or barrier film.
• Ensure the 1oz or 2oz bottle cap is closed tight.
• Long press the button to power on.
• Click to switch gears (1–3).
• Mix in short bursts (about 20–60 seconds) until pigment looks uniform.

Cleaning and care

• After removing the barrier, wipe the exterior with a clean cloth.
• Disinfect the exterior with 70% isopropyl alcohol on a cloth.
• Do not submerge the unit.
• Keep liquids away from the button, display, and charging port.
• Recharge via Type-C when needed.

Questions and answers

Q: What bottle sizes is this mixer made for?
It is designed for 1oz and 2oz ink bottles.

Q: Is it rechargeable and wireless?
Yes. It runs on a built-in 1000mAh battery for wireless use and charges via Type-C.

Q: What speeds does it run at?
3520 RPM, 4000 RPM, and 5200 RPM (3 gears).

Q: How do I switch gears?
Long press to power on. Click to switch between gears 1–3.

Q: Where should I mix inks in the studio?
Mix at a separate prep area, not at the workstation, to reduce contamination risk.

Q: Do I need to barrier the device?
Yes. Always use a machine bag or barrier film. Barrier tape can be used to cover touch points.

Q: How fast will it mix ink?
Many inks mix in about 5 seconds, but thicker pigments may need longer bursts.

Q: How do I clean it?
Remove the barrier, then wipe and disinfect the exterior. Do not soak or submerge.